The IGS statement is you boot code & I would venture to say it's an
identical statement to what I have in my 12.1(3) 2511 router.
ROM: System Bootstrap, Version 11.0(10c)XB2, PLATFORM SPECIFIC RELEASE
SOFTWARE(fc1)
BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c)XB2,
PLATFORM
SPECIFIC RELEASE SOFTWARE (fc1)
You definitely must have a ROM code & the IGS-BOOT-R (Version 11.0) allows
you to run the 12.X in the 2500 series boxes
Phil
----- Original Message -----
From: Deloso, Elmer G (WPNSTA Yorktown)
To:
Sent: Tuesday, May 08, 2001 7:59 AM
Subject: RE: IOS upgrade, failure [7:3513]
> Phil,
> If this is the case, please explain then why i was able to upgrade my 2516
> from a 10.2 to 12.1(8) when there were no boot rom chips on the board? The
> two 1/2-inch squares were empty. Yet the sh ver says it has IGS-RXBOOT
> something. Am i missing someting here? I did put 16F-16D in it. But I
reload
> and 12.1(8) looks okay. Of course, I haven't had time to run routing
> protocols on it. Thanks.
>
> Elmer
>
> -----Original Message-----
> From: Circusnuts [mailto:[EMAIL PROTECTED]]
> Sent: Monday, May 07, 2001 10:42 PM
> To: [EMAIL PROTECTED]
> Subject: Re: IOS upgrade, failure [7:3513]
>
>
> 11.2 wiil work, if you have @ least 4 Megs of RAM. Your 10.0 boot ROM's
> will make the interfaces disappear in anything above 11.3-ish, until you
> upgrade them to 11.0's.
>
> Phil
>
> ----- Original Message -----
> From: John Brandis
> To:
> Sent: Monday, May 07, 2001 9:04 PM
> Subject: IOS upgrade, failure [7:3513]
>
>
> > Hey all, I am back on for the day,
> > Have a 2503 router with suspected 4MB flash. I need to upgrade from IOS
> 10.2
> > to at least 11.3. Problem is that IOS 11.3 is 5MB.....
> > What can I do besides upgrade the flash.??????
> >
> >
> > John Brandis
> > Network Engineer
> > GoWireless Communications
> > 155 George Street Sydney
> > +61 2 9251 5000
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3594&t=3513
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
