Pinouts are 1-4 and 2-5 crossed. leds show alarm on both cards. They are
definately not shutdown. Show int results will have to wait. I just tried
to update the ios on one router and now it is not booting correctly. No
interfaces are being seen. (makes it hard to do a tftp download)
Neil Schneider
----- Original Message -----
From: "Jim Brown"
To: "'Neil Schneider'" ;
Sent: Tuesday, May 08, 2001 12:42 PM
Subject: RE: back-to-back t1 with wic-1dsu-t1? [7:3633]
> I believe clock source internal on one of the cards is all you need to
bring
> them up. Please post the 'show interface' results from both routers and
the
> related configs.
>
> What pinouts did you use for the cross-over cable?
>
> What LEDs are illuminated on the cards with the cable plugged in?
>
> Are you sure the interfaces are not in a shutdown state?
>
> -----Original Message-----
> From: Neil Schneider [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, May 08, 2001 10:47 AM
> To: [EMAIL PROTECTED]
> Subject: back-to-back t1 with wic-1dsu-t1? [7:3633]
>
>
> I am trying to set up 2 t1 wics back to back to simulate a t1 wan
> connection. I have a T1 crossover cable, clock source is internal on one
> card, but I get nothing, down and down. Is anyone doing this and willing
to
> share a configuration? Or give me a hint as to what may be wrong
>
> Thanks
>
> Neil Schneider
> CCNP CCSI (setting up a CCIE lab)
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3639&t=3633
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
