I would have to find it again but I'm sure that somewhere on CCO it says
that a 3620 shouldn't have more than 2 fast interfaces be they fast ethernet
or ATM or a combination.
Your router now has 4 fast interfaces.
Kevin Wigle
----- Original Message -----
From: "Gareth Hinton"
To:
Sent: Tuesday, 08 May, 2001 17:39
Subject: 3620 with 2 x NM-2FE-2W problem [7:3687]
> Hi all,
>
> Problem with a 3620:
>
> Takes one NM-2FE-2W fine. When second one is inserted major problems
arise.
>
> NM slot 0: PCI dev 5 init failed
> No fault history 0xFFFFFFFF. Need 11.1 (2) or higher ROM
>
> The boot rom is "System Bootstrap, Version 11.1(20)AA2"
>
> I've gone through CCO to confirm that the 3620 will take these cards, and
> although there were a few doubts, eventually found it and they should be
OK.
>
> Anybody seen similar or got ideas.
>
> Thanks,
>
> Gaz
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3703&t=3687
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
