I am doing a password recovery for a 1700 router, I manage to see its
previous configuration part. But I want to do a conf term to change
setting. I found it was controlled by TACACS+ AAA server. How do I disable
the setting of AAA so I can make change See below
rommom 1>confreg 0X2142
rommom 2>reset
Router>enable
Router#conf mem
Building configuration...
00:00:57: %IP_SNMP-3-SOCKET: can't open UDP socket
KUL01#
KUL01#
*Mar 1 00:01:08: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0.2,
cha
nged state to down
*Mar 1 00:01:08: %SYS-5-CONFIG_I: Configured from memory by console
KUL01#conf term
Command authorization failed.
KUL01#
*Mar 1 00:01:28: %AAAA-3-INVSTATE: AUTHOR/CMD: Internal state is invalid:
astr
uct 0x8093FF00 ustruct 0x0
-Traceback= 8006C154 8006C01C 800A41D0 800A5098 800B0CB8 80114BE0
==================================================================
De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
de afzender direct te informeren door het bericht te retourneren.
==================================================================
The information contained in this message may be confidential
and is intended to be exclusively for the addressee. Should you
receive this message unintentionally, please do not use the contents
herein and notify the sender immediately by return e-mail.
==================================================================
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3735&t=3735
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
