I would guess that if you boot the router ignoring the content of NVRAM that
you could then view the startup config (show start). You might then want to
do a cut and paste to Notepad or capture the output of your terminal
program. If loading the config disallows you from doing anything, then best
to erase start and reload. That wipes the router clean. Then config t and
use the Notepad copy to enter the parts that you need.
> -----Original Message-----
> From: Sim, CT (Chee Tong) [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, May 08, 2001 11:25 PM
> To: [EMAIL PROTECTED]
> Subject: password recovery problem with AAA [7:3735]
>
>
> I am doing a password recovery for a 1700 router, I manage to see its
> previous configuration part. But I want to do a conf term to change
> setting. I found it was controlled by TACACS+ AAA server.
> How do I disable
> the setting of AAA so I can make change See below
>
>
> rommom 1>confreg 0X2142
> rommom 2>reset
> Router>enable
>
> Router#conf mem
>
> Building configuration...
>
> 00:00:57: %IP_SNMP-3-SOCKET: can't open UDP socket
> KUL01#
> KUL01#
> *Mar 1 00:01:08: %LINEPROTO-5-UPDOWN: Line protocol on
> Interface Serial0.2,
> cha
> nged state to down
> *Mar 1 00:01:08: %SYS-5-CONFIG_I: Configured from memory by console
> KUL01#conf term
> Command authorization failed.
>
> KUL01#
> *Mar 1 00:01:28: %AAAA-3-INVSTATE: AUTHOR/CMD: Internal
> state is invalid:
> astr
> uct 0x8093FF00 ustruct 0x0
> -Traceback= 8006C154 8006C01C 800A41D0 800A5098 800B0CB8 80114BE0
>
>
>
> ==================================================================
> De informatie opgenomen in dit bericht kan vertrouwelijk zijn en
> is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht
> onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en
> de afzender direct te informeren door het bericht te retourneren.
> ==================================================================
> The information contained in this message may be confidential
> and is intended to be exclusively for the addressee. Should you
> receive this message unintentionally, please do not use the contents
> herein and notify the sender immediately by return e-mail.
>
>
> ==================================================================
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct
> and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3738&t=3735
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
