Hi folks,
I encounter some problem and hope that you folks can give me some idea.
I have 2 2651, say A and B, connecting to a group of switches. Trunking and
VTP are running on the switch group. Each 2651 is connecting to the switches
on same VLANs.
Say there is VLAN 1 and VLAN 2. Both 2651 are running trunking and dot1q
encapsulation.
Ok, FE0/0.1 of A and FE0/0.2 of B are on VLAN 1
FE0/0.2 of A and FE0/0.2 of B are on VLAN 2
I setup HSRP on both subinterface and router A is always the highest HSRP
priority.
I have a PC connecting or with IP address of VLAN 2 segment. I try to ping
from the PC to an interface of B but no response. But I can ping the
subinterface of B FE0/0.2.
Is there any issue running HSRP on vLAN subinterface or do I miss any
configuration??
Thanks bros.
Cheers,
Bremen
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3800&t=3800
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
