1) For Cisco 2500 series serial interface, it can support up to 2.04MB
only.
2) Check the default gateway in your workstation.
Do Traceroute in your workstation, to see any missing path.
HTH
Vincent Chong
""John Brandis"" G'Day all for the second time today.
> 2 questions:
>
> Question 1: I have a 4MB HDSL link coming into my 2503 serial 0 port. Can
I
> check the bandwidth to make sure that this is what I really have in terms
of
> BW.......
>
> Question 2: Have configured the router to connect to the HDSL network and
the
> ethernet network. That part is fine, I can access hosts on both networks
> (ping) from the router. However, when I go to my workstation and I
CORRECTLY
> configure the IP settings, all I can access is the router and nothing over
> the
> WAN link. I made sure that there are NO ACL's going against me and I have
the
> route static route configured correctly. What can I try now ????/
>
> thanks
> [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=3969&t=3958
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
