On Thu, 10 May 2001, John Brandis wrote:
> G'Day all for the second time today.
> 2 questions:
>
> Question 1: I have a 4MB HDSL link coming into my 2503 serial 0 port. Can I
> check the bandwidth to make sure that this is what I really have in terms
of
> BW.......
check the clockrate on show controllers
>
> Question 2: Have configured the router to connect to the HDSL network and
the
> ethernet network. That part is fine, I can access hosts on both networks
> (ping) from the router. However, when I go to my workstation and I
CORRECTLY
> configure the IP settings, all I can access is the router and nothing over
> the
> WAN link. I made sure that there are NO ACL's going against me and I have
the
> route static route configured correctly. What can I try now ????/
>
The ip's assigned to the ethernet interface of the 2503, are these IP's
that your upstream routed to you, or are these IP's you just made up
yourself? Are you running NAT? The IP's you use on the e0 interface must
be IP's that were routed to you from the HDSL network provider.
Alternativly, you can use RFC1918 space and run NAT.
Brian
> thanks
> [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
>
-----------------------------------------------
We have MOVED!! Make note of our new address!!!
I'm buying / selling used CISCO gear!!
email me for a quote
Brian Feeny,CCDP,CCNP+VAS Scarlett Parria
[EMAIL PROTECTED] [EMAIL PROTECTED]
318-213-4709 318-213-4701
Netjam, LLC http://www.netjam.net
333 Texas St. VISA/MC/AMEX/COD
Suite 1401 30 day warranty
Shreveport, LA 71101 Cisco Channel Partner
p: 318-212-0245
f: 318-212-0246
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4000&t=3958
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
