I know squat about the AGS but the Line Protocol Down normally means that
they're not agreeing on whether they're using HDLC, PPP, etc.
The IOS of your AGS might have a different default so I would check both
sides and just to be sure I'd give the command explicitly on both sides.
(encap hdlc or encap ppp)
and see what happens.
Someone more familiar with AGS will probably chime in.
Kevin Wigle
----- Original Message -----
From: "Randy Espiritu"
To:
Sent: Saturday, 12 May, 2001 11:55
Subject: AGS and 2500 router [7:4269]
> Hi All
>
> I'm running to problem configuring AGS router.
> I'm connecting serial to serial and I'm getting Serial UP, Line Protocol
> Down. I have no idea what else to do with this. I tried messing with the
> clock rate but no luck.
>
> When I connected both 2500's serial, no problem at all.
>
> All help is appreciated.
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4272&t=4269
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
