You may also need to pop the hood on the AGS and ensure that you move the
jumpers to set it to DTE or DCE as desired.
Here's a starting point:
http://www.cisco.com/univercd/cc/td/doc/product/core/cisagspl/agscfig/34084.
htm
You can also do searches for DCE DTE jumpers AGS and find more infomration
about this.
The AGS+ is unyielding and unforgiving about any hardware configuration
errors, so I would ensure that you jumpers are set as desired. If the AGS
end of the cable is is DCE, ensure you configure the serial port as DCE by
moving its jumpers. Also, start low such as 64Kbps, even if it can
handle higher; that way, you can get the lowest common denominator out of
the way.
HTH,
Charles
""Kevin Wigle"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I know squat about the AGS but the Line Protocol Down normally means that
> they're not agreeing on whether they're using HDLC, PPP, etc.
>
> The IOS of your AGS might have a different default so I would check both
> sides and just to be sure I'd give the command explicitly on both sides.
> (encap hdlc or encap ppp)
>
> and see what happens.
>
> Someone more familiar with AGS will probably chime in.
>
> Kevin Wigle
>
> ----- Original Message -----
> From: "Randy Espiritu"
> To:
> Sent: Saturday, 12 May, 2001 11:55
> Subject: AGS and 2500 router [7:4269]
>
>
> > Hi All
> >
> > I'm running to problem configuring AGS router.
> > I'm connecting serial to serial and I'm getting Serial UP, Line Protocol
> > Down. I have no idea what else to do with this. I tried messing with
the
> > clock rate but no luck.
> >
> > When I connected both 2500's serial, no problem at all.
> >
> > All help is appreciated.
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4295&t=4269
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
