Albert,
            I noticed that your Dialer0 is configured for 10.130.1.1,
whereas the dialer map to the other side of the connection is using
10.130.0.2.  Also, why the dialer map for the all broadcast address..?

HTH

Nigel..

----- Original Message -----
From: Albert Lu 
To: 
Sent: Sunday, April 22, 2001 4:21 AM
Subject: DDR Problems [7:1521]


> Hello Group,
>
> I'm currently having problems with DDR, and was hoping someone could take
a
> look at my config. I'm trying to get it to dial through my modem when any
IP
> traffic are detected, but I've tried pinging many times with no result.
I've
> also tried debug dialer to see if there is any thing going on, and it's
> giving me no results.
>
> Any help would be appreciated.
>
> Thanks
>
> Albert
>
> Current configuration:
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname BranchA
> !
> enable secret 5 $1$yznA$yGDVg7d22bM1FvzAJveaP0
> !
> username CentralA password 0 cisco
> !
> !
> !
> !
> ip subnet-zero
> no ip domain-lookup
> ip host modem 2065 11.1.1.1
> !
> isdn switch-type basic-5ess
> isdn voice-call-failure 0
> chat-script blah "" "atdt" OK
> !
> !
> !
> interface Loopback69
>  ip address 11.1.1.1 255.255.255.0
>  no ip directed-broadcast
> !
> interface FastEthernet0/0
>  ip address 10.218.0.1 255.255.255.0
>  no ip directed-broadcast
>  duplex auto
>  speed auto
> !
> interface Serial0/0
>  no ip address
>  no ip directed-broadcast
>  no ip mroute-cache
>  shutdown
> !
> interface Serial0/1
>  no ip address
>  no ip directed-broadcast
>  shutdown
> !
> interface BRI1/0
>  no ip address
>  no ip directed-broadcast
>  encapsulation ppp
>  shutdown
>  dialer idle-timeout 300
>  dialer-group 1
>  isdn switch-type basic-5ess
>  ppp authentication chap
> !
> interface BRI1/1
>  no ip address
>  no ip directed-broadcast
>  shutdown
>  isdn switch-type basic-5ess
> !
> interface BRI1/2
>  no ip address
>  no ip directed-broadcast
>  shutdown
>  isdn switch-type basic-5ess
> !
> interface BRI1/3
>  no ip address
>  no ip directed-broadcast
>  shutdown
>  isdn switch-type basic-5ess
> !
> interface Async65
>  no ip address
>  no ip directed-broadcast
>  encapsulation ppp
>  keepalive 10
>  dialer in-band
>  dialer rotary-group 0
>  async default routing
>  async mode dedicated
>  fair-queue 64 16 0
> !
> interface Dialer0
>  ip address 10.130.1.1 255.255.255.0
>  no ip directed-broadcast
>  encapsulation ppp
>  dialer in-band
>  dialer wait-for-carrier-time 180
>  dialer map ip 10.130.0.2 name CentralA 0414184780
>  dialer map ip 255.255.255.255 name CentralA 0414184780
>  dialer-group 1
>  ppp authentication chap
> !
> ip nat translation timeout never
> ip nat translation tcp-timeout never
> ip nat translation udp-timeout never
> ip nat translation finrst-timeout never
> ip nat translation syn-timeout never
> ip nat translation dns-timeout never
> ip nat translation icmp-timeout never
> ip classless
> ip route 10.115.0.0 255.255.255.0 10.130.0.2
> no ip http server
> !
> dialer-list 1 protocol ip permit
> !
> line con 0
>  exec-timeout 0 0
>  transport input none
> line aux 0
>  login
>  modem InOut
>  transport input all
>  transport output none
>  stopbits 1
>  speed 115200
>  flowcontrol hardware
> line vty 0 4
>  password cisco
>  login
> !
> end
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=1523&t=1521
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to