Also, try differnt baud rates for your Hyber Terminal. The console port of
the router may have specific setting for the baud rate...
""Dwayne"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I am getting the following message:
>
> "System Bootstrap, Version 11.0(10c), SOFTWARE
> Copyright (c) 1986-1996 by cisco Systems
> 2500 processor with 14336 Kbytes of main memory"
>
> I can break into rommon & change the reg values, but
> come back up with the above message.
>
> Can anyone lend some suggestions?
>
> Thanks, Dwayne
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4301&t=4289
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
