First thing: This is a mailing list for matters related to CISCO
certifiaction.
Second thing: NT probably needs you to buy an additional license in order to
use the second processor - or if NT was installed with only one processor
and the second added later - then it only installed the single processor
kernel.
Feargal
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Mr. Oletu Hosea Godswill, CCNA
Sent: Monday, May 14, 2001 11:44 PM
To: [EMAIL PROTECTED]
Subject: Two(2) Processors [7:4499]
Hi group,
I have a little proble on my hands.
I have an NT4 server running sp4. There are two
processors in it, it is a compaq system. It also have
two processor controllers installed.
My problem is, the hardware sees the 2 processors at
bootup and displays information regarding both, but NT
still records 1 processor.
Do I need to do something else.
Help will be appreciated.
Regards.
Oletu H. G.
__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - buy the things you want at great prices
http://auctions.yahoo.com/
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4502&t=4499
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
