It shouldn't be any different than a 4 port router. I'm not sure what is
supported in the 1600 IOS, but here is a basic template of the Telco Cloud
config.
interface Serial0
no ip address
encapsulation frame-relay
frame-relay lmi-type ansi
frame-relay intf-type dce
frame-relay route 102 interface Serial1 201
frame-relay route 103 interface Serial2 301
frame-relay route 105 interface Serial3 501
!
interface Serial1
no ip address
encapsulation frame-relay
frame-relay lmi-type ansi
frame-relay intf-type dce
frame-relay route 201 interface Serial0 102
Phil
----- Original Message -----
From: Gary Hughes
To:
Sent: Tuesday, May 15, 2001 11:52 PM
Subject: 1600's - Using to make a Frame Switch [7:4643]
> Anybody know the config's to make a 4 port Frame-Switch from 2 1600's
(both
> with 2 serial ports)
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4647&t=4643
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
