you didn't show us the relevent lines of your config..........
and you didn't describe how you attempted to "jump" to another
router................
so we can't help.
So, I searched CCO and within a few seconds came up with:
http://www.cisco.com/warp/public/793/access_dial/comm_server.html
Kevin Wigle
----- Original Message -----
From: Mark Rose
To:
Sent: Wednesday, May 16, 2001 3:22 PM
Subject: Reverse Telnet [7:4723]
> I am trying to set up a 2511 as an access server. I believe I have that
end
> set properly. When I telnet to jump to another router I get the message
> that "is not an open connection". I am not sure what I missed in vty of
> router going to. Is there documentation I can get to help me set this up.
>
> As always TIA
>
> Mark
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4735&t=4723
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
