Just to be sure:
You are connecting from one of the 2511 octal cable ends to the console port
of the other routers? Lower cable / end 1 goes to the "east" router?
When trying to connect for the first time you are using the hostname of the
router i.e. "east" ?
When it says "trying ...." you hit "enter" ?
> -----Original Message-----
> From: Mark Rose [mailto:[EMAIL PROTECTED]]
> Sent: Thursday, May 17, 2001 4:02 PM
> To: [EMAIL PROTECTED]
> Subject: RE: Reverse Telnet [7:4723]
>
>
> Sorry I should have thought of that.
>
> 2511#sh run
> Building configuration...
>
> Current configuration:
> !
> version 11.0
> service password-encryption
> service udp-small-servers
> service tcp-small-servers
> !
> hostname 2511
> !
> enable secret 5 $1$KRXt$MfpQSqUGp0NOiHRhiRwPs1
> !
> no ip domain-lookup
> !
> interface Loopback0
> ip address 10.1.1.1 255.255.255.255
> !
> interface Ethernet0
> ip address 192.168.1.69 255.255.255.0
> !
> interface Serial0
> no ip address
> shutdown
> no fair-queue
> !
> interface Serial1
> no ip address
> shutdown
> !
> ip host east 2001 10.1.1.1
> ip host south 2004 10.1.1.1
> ip host north 2003 10.1.1.1
> ip host west 2002 10.1.1.1
> ip classless
> banner exec ^C
> 01 - west console
> 02 - east console
> 03 - north console
> 04 - south console ^C
> !
> line con 0
> line 1 16
> no exec
> transport input all
> line aux 0
> transport input all
> line vty 0
> exec-timeout 0 0
> password 7 06030328464F01
> login
> line vty 1
> exec-timeout 0 0
> password 7 050E0A062B4D46
> login
> line vty 2
> exec-timeout 0 0
> password 7 14121E02060522
> login
> line vty 3
> exec-timeout 0 0
> password 7 045E070F052044
> login
> line vty 4
> exec-timeout 0 0
> password 7 14121E02060522
> login
> !
> end
>
>
> Second router
>
> est#sh run
> Building configuration...
>
> Current configuration:
> !
> version 11.2
> service password-encryption
> no service udp-small-servers
> no service tcp-small-servers
> !
> hostname west
> !
> enable secret 5 $1$57px$PD.qgpO/R2whcXLTrvlYA.
> !
> !
> interface Ethernet0
> no ip address
> shutdown
> !
> interface Ethernet1
> no ip address
> shutdown
> !
> interface Serial0
> no ip address
> shutdown
> no fair-queue
> !
> interface Serial1
> no ip address
> shutdown
> !
> no ip classless
> !
> !
> line con 0
> line aux 0
> line vty 0 4
> password 7 06030328464F01
> login
> transport input telnet
> !
> end
>
>
>
>
> -----Original Message-----
> From: Marco P Rodrigues [mailto:[EMAIL PROTECTED]]
> Sent: Wednesday, May 16, 2001 2:15 PM
> To: Mark Rose
> Cc: [EMAIL PROTECTED]
> Subject: Re: Reverse Telnet [7:4723]
>
>
> You could paste a copy of your current configuration and we
> could take a
> quick glance at it.
>
> --
> "Virtually All Internet Porno flows through the systems of one
> company. Cisco Systems. Emporning the Internet Generation."
>
>
> On Wed, 16 May 2001, Mark Rose wrote:
>
> > I am trying to set up a 2511 as an access server. I believe
> I have that
> end
> > set properly. When I telnet to jump to another router I
> get the message
> > that "is not an open connection". I am not sure what I
> missed in vty of
> > router going to. Is there documentation I can get to help
> me set this up.
> >
> > As always TIA
> >
> > Mark
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to
> [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct
> and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4915&t=4723
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]