Is it possible to assign multiple IP address ranges to a single port channel
interface on the layer 3 blade? I want to achieve the same effect as adding
a secondary IP address on a router Ethernet port.
I have 2 subnets on the clients network that need to remain in the same VLAN
- i.e. VLAN 1. If the above is not possible, the I need to create 2 VLANs
and 2 port channel interfaces, which the client does not want.
Thanks in advance
Andrew Larkins
BCom, CCNA, CCDA
Bytes Technology Group Limited
Tel : +27 11 800 9467
Fax : +27 11 800 9496
Mobile : +27 83 656 7214
Email : [EMAIL PROTECTED]
OR [EMAIL PROTECTED]
"This message may contain information which is confidential and subject to
legal privilege. If you are not the intended recipient, you may not peruse,
use, disseminate, distribute or copy this message. If you have received
this message in error, please notify the sender immediately by email,
facsimile or telephone and return and/or destroy the original message."
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4820&t=4820
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
