Andy, Peter
that part about the ipsec and l2tp competing is correct, check out the ire
client for win 2000 for ipsec capabilities into a router. you can get cisco
support when vpning with the ire client into a cisco ios platform.
jason
www.ire.com now called,
http://www.safenet-inc.com/index.asp
-----Original Message-----
From: andylow [mailto:[EMAIL PROTECTED]]
Sent: Thursday, May 17, 2001 2:38 PM
To: [EMAIL PROTECTED]
Subject: Re: Cisco IOS VPN with Win2000 L2TP [7:4866]
Hi,
> Is there any way to config, for the Win2000 pc can connect IPSec over L2TP
> direct to the gateway router? Is this possible or do I need to also config
> the ISP's router too?
IPSec and L2TP both are VPN protocols used for tunneling, I don't think you
can use one over the other, you can only choose to use either one for
tunneling over the 2 peers.
cheers,
Andy
----- Original Message -----
From: Peter Li
To:
Sent: Friday, May 18, 2001 1:22 AM
Subject: Cisco IOS VPN with Win2000 L2TP [7:4866]
> Hi All,
>
> I'm trying to create L2TP vpn between Win2000 pc and Cisco 3640 router
> running 12.1(2) T supports 3DES.
> So far, most configuration samples I've seen can only do L2TP with a 2
> router setup, LAC (ISP Access router) and LES (Enterprise gateway router).
>
> Is there any way to config, for the Win2000 pc can connect IPSec over L2TP
> direct to the gateway router? Is this possible or do I need to also config
> the ISP's router too?
>
> Any leads greatly appreciated.
>
> Peter Li
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4893&t=4866
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
