Just a quick question but is the IOS version you are using compatible with this card? -----Original Message----- From: Adam Wang [mailto:[EMAIL PROTECTED]] Sent: 18 May 2001 15:37 To: [EMAIL PROTECTED] Subject: trouble configure channle-group on WIC T1 card [7:4983] Hi group, I have a 2621 router with a serial and a FT1 WIC card installed in it. I want to assign different timeslots to the T1 cotroller, but when I am type controller ? in the config mode, it tells me it's an unrecogmized command. Is the controller t1 command not supported on the FT1 WIC card. If not, when will this command work, and is there any way to have multiple grouped timeslots in my current hardware config? Thanks. Adam __________________________________________________ Do You Yahoo!? Yahoo! Auctions - buy the things you want at great prices http://auctions.yahoo.com/ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=4985&t=4983 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
