yes. I can setup frational of the T1 using the
service-module t1 timeslots 1-2 command, but I can't
setup multiple groups of channles using this command.
Adam
--- "McCallum, Robert"
wrote:
> Just a quick question but is the IOS version you are
> using compatible with
> this card?
>
> -----Original Message-----
> From: Adam Wang [mailto:[EMAIL PROTECTED]]
> Sent: 18 May 2001 15:37
> To: [EMAIL PROTECTED]
> Subject: trouble configure channle-group on WIC T1
> card [7:4983]
>
>
> Hi group,
>
> I have a 2621 router with a serial and a FT1 WIC
> card
> installed in it. I want to assign different
> timeslots
> to the T1 cotroller, but when I am type controller ?
> in the config mode, it tells me it's an unrecogmized
> command. Is the controller t1 command not supported
> on the FT1 WIC card. If not, when will this command
> work, and is there any way to have multiple grouped
> timeslots in my current hardware config?
>
> Thanks.
>
> Adam
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Auctions - buy the things you want at great
> prices
> http://auctions.yahoo.com/
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to
[EMAIL PROTECTED]
__________________________________________________
Do You Yahoo!?
Yahoo! Auctions - buy the things you want at great prices
http://auctions.yahoo.com/
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=4998&t=4983
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
