The router is recognizing the new flash, that message is Cisco's
slightly cryptic way of telling you that there is no image on that flash
yet. You'll need to send a break signal to get to ROMMON mode and
download an image with either TFTP (through the ethernet port) or xmodem
(through the console port). You can find the instructions to do that on
Cisco's website. If you run into problems, let us know.
HTH,
John
>>> "Fawad Alam" 5/18/01 9:51:25 AM >>>
In order to increase flash on my 2600 Router I ordered 16MB Kingston
Flash.
I removed the original 8 MB flash and inserted this new 16MB flash and
the
message I am getting is:
rommon 1 > boot
device does not contain a valid magic number
boot: cannot open "flash:"
boot: cannot determine first file name on device "flash:"
What should I do for the router to recognize this new flash??
Thanks...
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at
http://www.hotmail.com.
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5008&t=5001
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
