I tried a blank flash with the 3620 router and got the same problem. I
could not even assign an IP address to the ethernet port so I can download
from tftp the new ios image. I had to use the xmodem using the console
port. It took me like 30 minutes with the 115kbps speed....
""John Neiberger"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> The router is recognizing the new flash, that message is Cisco's
> slightly cryptic way of telling you that there is no image on that flash
> yet. You'll need to send a break signal to get to ROMMON mode and
> download an image with either TFTP (through the ethernet port) or xmodem
> (through the console port). You can find the instructions to do that on
> Cisco's website. If you run into problems, let us know.
>
> HTH,
> John
>
> >>> "Fawad Alam" 5/18/01 9:51:25 AM >>>
> In order to increase flash on my 2600 Router I ordered 16MB Kingston
> Flash.
> I removed the original 8 MB flash and inserted this new 16MB flash and
> the
> message I am getting is:
> rommon 1 > boot
> device does not contain a valid magic number
> boot: cannot open "flash:"
> boot: cannot determine first file name on device "flash:"
>
> What should I do for the router to recognize this new flash??
>
> Thanks...
>
> _________________________________________________________________________
> Get Your Private, Free E-mail from MSN Hotmail at
> http://www.hotmail.com.
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5085&t=5001
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
