hi thomas try this link: http://www.cisco.com/univercd/cc/td/doc/product/software/ios120/12cgcr/wan_c /wcfrelay.htm#xtocid2427348 right from the Cisco documentation - I searched on "frame relay switch configuration" at www.cisco.com try this one for a good example of a configuration - you can take a few minutes to make it a hub-and-spoke environment http://www.fatkid.com/html/421_ipx_with_nlsp.html - click on the frame switch and the topology buttons on the left. -e- ----- Original Message ----- From: "Thomas" To: Sent: Sunday, May 20, 2001 12:33 AM Subject: How to setup a frame relay switch for hub and spoke of [7:5174] > Hi All - I am trying to setup my lab with point-to-point frame relay > enviroment. But I have difficulty setup the frame relay switch to I can > simulate my labs. Is there any good reference out there I can use? Please > help. Thanks! > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=5176&t=5176 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
