Hi
I am facing problem in setting the isl trunk between 29900xL series switch
and 7100 series router .The configuration is like i am using fast ethernet
port 0/16 of switch for trunk .
i configure it using commands as below for the switch i do..
conf t
int vlan 1
ip adress 192.168.3.215 255.255.255.0
ip default-gateway 192.168.3.210
conf ter
int fast eth0/16
switchport mode trunk
switchport trunk encapsulation isl(right )
swicthport trunk allowed vlan all
conf ter
int fast0/15
switchport access vlan 2
spannig portfast
exit
also i did like
vlan database
vtp server
vlan 2
now for the router
conf t
int fast0/0
no shutdown
exit
int fast0/0.1
encap isl 1
ip add 192.168 .3.210 255.255.255.0
exit
int fast0/0.2
encap isl 2
ip add 192.168 .4.210 255.255.255.0
exit
now the problem is i am not able to ping from router to interface
192.168.3.210 ..am i doing something wrong ......also after this if i do
show cdp neigh the router see the switch but if i do it on switch it doesn't
see the router ..please help .....
where i am doing wrong ..............Pleaseeeeeeeeeeeee help
Thanx in advance
Regards
Arun Sharma
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5272&t=5272
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
