What do you find in show vtp comand set ?
Check your trunking mode in the catalyst.
HTH
Vincent Chong
""Arun"" Hi
> I am facing problem in setting the isl trunk between 29900xL series switch
> and 7100 series router .The configuration is like i am using fast ethernet
> port 0/16 of switch for trunk .
> i configure it using commands as below for the switch i do..
>
> conf t
> int vlan 1
> ip adress 192.168.3.215 255.255.255.0
> ip default-gateway 192.168.3.210
>
> conf ter
> int fast eth0/16
> switchport mode trunk
> switchport trunk encapsulation isl(right )
> swicthport trunk allowed vlan all
> conf ter
> int fast0/15
> switchport access vlan 2
> spannig portfast
> exit
> also i did like
> vlan database
> vtp server
> vlan 2
>
> now for the router
> conf t
> int fast0/0
> no shutdown
> exit
> int fast0/0.1
> encap isl 1
> ip add 192.168 .3.210 255.255.255.0
> exit
> int fast0/0.2
> encap isl 2
> ip add 192.168 .4.210 255.255.255.0
> exit
>
>
> now the problem is i am not able to ping from router to interface
> 192.168.3.210 ..am i doing something wrong ......also after this if i do
> show cdp neigh the router see the switch but if i do it on switch it
doesn't
> see the router ..please help .....
> where i am doing wrong ..............Pleaseeeeeeeeeeeee help
> Thanx in advance
>
>
> Regards
> Arun Sharma
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5286&t=5272
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
