Is the IOS a plus version? Only plus versions support the voice modules, at
least in my experience.
andras
-----Original Message-----
From: Circusnuts [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, May 22, 2001 7:28 PM
To: [EMAIL PROTECTED]
Subject: Problems with a 3620 voice router [7:5500]
Hey all- just picked up as 3620 router with 2 Serial/ 2 Ethernet/ & NMHDV
(VIC
1MFT-T1). The issue I am having is this... the voice module, actually
nothing voice shows on the boot-up. It's almost as if the interface in not
installed. I have tried upgrading the IOS (12.1(8) IP/H323). The module
looks fine too, no burn smell. Any ideas ???
Router# Show Version
Cisco Internetwork Operating System Software
IOS (tm) 3600 Software (C3620-IX-M), Version 12.1(8), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2001 by cisco Systems, Inc.
Compiled Mon 16-Apr-01 18:54 by kellythw
Image text-base: 0x60008940, data-base: 0x60A18000
ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
SOFTWARE
(f
c1)
Router uptime is 4 minutes
System returned to ROM by reload
System image file is "flash:c3620-ix-mz.121-8.bin"
cisco 3620 (R4700) processor (revision 0x81) with 28672K/4096K bytes of
memory.
Processor board ID 14825930
R4700 CPU at 80Mhz, Implementation 33, Rev 1.0
Bridging software.
X.25 software, Version 3.0.0.
2 Ethernet/IEEE 802.3 interface(s)
2 Serial network interface(s)
DRAM configuration is 32 bits wide with parity disabled.
29K bytes of non-volatile configuration memory.
8192K bytes of processor board System flash (Read/Write)
Configuration register is 0x2102
Thanks in advance !!!
Phil
FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5504&t=5500
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]