Use the IP/PLUS image version 12.1.5T. The "T" train supports the the
features you will need and I have had great luck with it. The "h.323"
version is mostly for Gatekeeper only voice stuff.
Tony M.
#6172
----- Original Message -----
From: Andras Bellak
To:
Sent: Tuesday, May 22, 2001 8:37 PM
Subject: RE: Problems with a 3620 voice router [7:5500]
> Is the IOS a plus version? Only plus versions support the voice modules,
at
> least in my experience.
>
> andras
>
>
> -----Original Message-----
> From: Circusnuts [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, May 22, 2001 7:28 PM
> To: [EMAIL PROTECTED]
> Subject: Problems with a 3620 voice router [7:5500]
>
>
> Hey all- just picked up as 3620 router with 2 Serial/ 2 Ethernet/ & NMHDV
> (VIC
> 1MFT-T1). The issue I am having is this... the voice module, actually
> nothing voice shows on the boot-up. It's almost as if the interface in
not
> installed. I have tried upgrading the IOS (12.1(8) IP/H323). The module
> looks fine too, no burn smell. Any ideas ???
>
> Router# Show Version
> Cisco Internetwork Operating System Software
> IOS (tm) 3600 Software (C3620-IX-M), Version 12.1(8), RELEASE SOFTWARE
(fc1)
> Copyright (c) 1986-2001 by cisco Systems, Inc.
> Compiled Mon 16-Apr-01 18:54 by kellythw
> Image text-base: 0x60008940, data-base: 0x60A18000
>
> ROM: System Bootstrap, Version 11.1(20)AA2, EARLY DEPLOYMENT RELEASE
> SOFTWARE
> (f
> c1)
>
> Router uptime is 4 minutes
> System returned to ROM by reload
> System image file is "flash:c3620-ix-mz.121-8.bin"
>
> cisco 3620 (R4700) processor (revision 0x81) with 28672K/4096K bytes of
> memory.
> Processor board ID 14825930
> R4700 CPU at 80Mhz, Implementation 33, Rev 1.0
> Bridging software.
> X.25 software, Version 3.0.0.
> 2 Ethernet/IEEE 802.3 interface(s)
> 2 Serial network interface(s)
> DRAM configuration is 32 bits wide with parity disabled.
> 29K bytes of non-volatile configuration memory.
> 8192K bytes of processor board System flash (Read/Write)
>
> Configuration register is 0x2102
>
> Thanks in advance !!!
> Phil
> FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5516&t=5500
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
