When I first read the original message, my response seemed too simple, so I
didn't reply...
Here it is: Type 'exit', and hit enter.
Does this not meet the requirements? Does the line get hung up or something?
Is there more to this question than meets the eye?
----- Original Message -----
From: "Frank Kim"
To:
Sent: Wednesday, May 23, 2001 10:55 PM
Subject: CORRECTION: Re: reverse telnet [7:5655]
> Hi folks,
> I know about the ctrl-shift-6 x. Please read my message again. I am not
> telnet'ing from the 2511. I sit on another workstation which is on the
> same network as the ethernet segment of the 2511 and I telnet from there.
> Please re-read my question. Sorry for the confusion.
>
>
> -Frank
>
>
> On Wed, 23 May 2001, Kevin Wigle wrote:
>
> > with this simple scenario all you need do is:
> >
> > control-shift-6 (all at one time)
> >
> > release
> >
> > and then type x
> >
> > this should bring you back to the terminal server
> >
> > then type the command: disconnect 1
> >
> > r1 is gone and you're left with the terminal server connection
> >
> > Kevin Wigle
> >
> > ----- Original Message -----
> > From: "Frank Kim"
> > To:
> > Sent: Wednesday, 23 May, 2001 20:38
> > Subject: reverse telnet [7:5655]
> >
> >
> > > Below is my config of a 2511. My question is if I sit on another
> > > workstation and telnet to 192.168.1.1 2001 which brings me to R1. Once
> > > I am in, is there a 'key-stroke' I can enter in to have the 2511
> terminate
> > > my session? I'm currently closing out my telnet application to have
the
> > > session terminated. Thanks for any help.
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5672&t=5655
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]