Dear all
I have a router configured with RIP routing protocol "router rip----network
50.0.0.0" then I found it discover some route from a solaris box
50.100.45.3 and point some routes (as shown below) to solaris box, as the
solaris box got route to all these network. My question is " Does Solaris
box and microsoft PC run RIP? if yes, how to enable and configure it?" I
thought RIP can only discover the route from the router? am I wrong?
SW01-RSM>sh ip route rip
R 10.0.0.0/8 [120/2] via 50.100.45.3, 00:00:23, Vlan1
R 199.105.182.0/24 [120/3] via 50.100.45.3, 00:00:23, Vlan1
R 192.168.38.0/24 [120/2] via 50.100.45.3, 00:00:23, Vlan1
R 192.173.168.0/24 [120/2] via 50.100.45.3, 00:00:23, Vlan1
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5862&t=5862
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]