How about 'file bh60.bin' instead of 'file bh60' ?
""Paul Holloway"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I am stumped... I'm trying to tftp a newer ios into a PIX515 and keep
> getting the message "TFTP failed (return:-10 arg:0x1)". I have went
through
> all the correct steps, I believe, but must be missing something simple. Is
> there a certain way the file should be located on the TFTP server? Is
there
> a port that should be opened on the PIX that the documentation doesn't
> mention? Here's what I've done so far. (Copied from Hyperterminal ROM mode
> on PIX)
>
> Use BREAK or ESC to interrupt flash boot.
> Use SPACE to begin flash boot immediately.
> Flash boot interrupted.
> 0: i8255X @ PCI(bus:0 dev:13 irq:10)
> 1: i8255X @ PCI(bus:0 dev:14 irq:7 )
>
> Using 1: i82559 @ PCI(bus:0 dev:14 irq:7 ), MAC: 0005.328f.85c1
> Use ? for help.
> monitor> address 192.168.1.134
> address 192.168.1.134
> monitor> server 192.168.1.132
> server 192.168.1.132
> monitor> file bh60
> file bh60
> monitor> ping 192.168.1.132
> Sending 5, 100-byte 0x358e ICMP Echoes to 192.168.1.132, timeout is 4
> seconds:
> !!!!!
> Success rate is 100 percent (5/5)
> monitor> tftp
> tftp [EMAIL PROTECTED]
> TFTP failed (return:-10 arg:0x1)
>
> Any help would be appreciated!!
>
> Paul
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5930&t=5919
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
