I have a frame network of about 8 sites (2 hosts). I have an internet
connection at 2 sites. I want 3 of the remotes to go out one internet
connection and 3 to go out the other, but I want all of them failover if one
of the internet connections fail.
When this happens I don't want all the traffic from GroupA to flow to HostA
and then get routed to HostB to get to the internet. I also have a firewall
between both Hosts and the internet (link between router and firewall will
not die even if internet goes down. My firewall supports RIP & OSPF (BGP is
an Option). This is most likely a Nokia based Checkpoint FW-1.
And here is the kicker.....these are all 1600's (BGP might kill them).
[demime removed a uuencoded section named RedInet.jpg which was 640 lines]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5977&t=5977
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
