Sorry, I had an image attached but it looks like it got stripped off.
________
1A-------- / \
_____
2A--------/ /----HostA---=FW=----/ \
3A--------\ Frame \ \ Inet
/
1B--------/ Relay / /
\
2B--------\ \----HostB---=FW=-------\_____/
3B-------- \_________ /
""Jim Franklin"" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> I have a frame network of about 8 sites (2 hosts). I have an internet
> connection at 2 sites. I want 3 of the remotes to go out one internet
> connection and 3 to go out the other, but I want all of them failover if
one
> of the internet connections fail.
>
> When this happens I don't want all the traffic from GroupA to flow to
HostA
> and then get routed to HostB to get to the internet. I also have a
firewall
> between both Hosts and the internet (link between router and firewall will
> not die even if internet goes down. My firewall supports RIP & OSPF (BGP
is
> an Option). This is most likely a Nokia based Checkpoint FW-1.
>
> And here is the kicker.....these are all 1600's (BGP might kill them).
>
>
>
>
>
> [demime removed a uuencoded section named RedInet.jpg which was 640 lines]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=5982&t=5977
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]