Well not sure about the stat but since its an event not an specific error I
would try following :
- Though there is an OIR event configure same port & put it online, verify
X25 works. Even if it works make sure you dont have any errors on link.
- Try changing cable/PA/bay on same box.
- If you another router running same image then use same cable/pa to make
sure if you get same error.
If that works then change logging level, also make sure you dont have
any records by typing following commands if its there then add more
information to mail.
- show exception
- show align
thanks,
rahul.
----- Original Message -----
From: "Arun"
To:
Sent: Saturday, May 26, 2001 10:06 PM
Subject: Re: help --------------Pls ................OIR Error [7:6021]
> Hi
> Here the detail for u i have ver 11.8 runnign on it
>
> Cisco Internetwork Operating System Software
> IOS (tm) 3600 Software (C3640-JS-M), Version 11.3(8), RELEASE SOFTWARE
(fc1)
> Copyright (c) 1986-1999 by cisco Systems, Inc.
> Compiled Tue 02-Feb-99 14:13 by dschwart
> Image text-base: 0x60008918, data-base: 0x608E8000
>
> ROM: System Bootstrap, Version 11.1(20)AA1, EARLY DEPLOYMENT RELEASE
> SOFTWARE (f
> c1)
> System image file is "flash:c3640-js-mz.113-8", booted via flash
>
> cisco 3640 (R4700) processor (revision 0x00) with 49152K/16384K bytes of
> memory.
> Processor board ID 13831748
> R4700 processor, Implementation 33, Revision 1.0
> Bridging software.
>
>
> Regards
> Arun Sharma
>
> ""Chuck Larrieu"" wrote in message
> [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > Beat the hell out of me.
> >
> > In the past I have posted about problems with earlier 12.x codes, where
if
> I
> > plugged serial cables into a serial interface while the router was
powered
> > on, IP would not work, although IPX would.
> >
> > I've had people tell me I was an idiot, and this couldn't happen. But
> Pamela
> > Forsythe told me she recognized the phenomenon.
> >
> > I've moved my routers onto various versions of 12.1 code, and have not
> seen
> > the problem. Actually, I don't think I ever saw the problem with later
> > versions of 12.0 code either.
> >
> > Still curious what IOS version you are running.
> >
> > Chuck
> >
> >
> > -----Original Message-----
> > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf Of
> Arun
> > Sent: Saturday, May 26, 2001 8:02 AM
> > To: [EMAIL PROTECTED]
> > Subject: Re: help --------------Pls ................OIR Error [7:6021]
> >
> > hi
> > yes i tried reloading the router with the cables attached and it worked
> > ......
> > thanks for the help but what could be the reason for that if i know it
> will
> > be a help .....
> >
> > Arun Sharma
> > ""Chuck Larrieu"" wrote in message
> > [EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> > > Have you tried reloading the router with the cable attached?
> > >
> > > Or blowing away the X.35 config, reloading with the cable attached,
then
> > > putting in the X.25
> > >
> > > What version of IOS are you running? I have documented a couple of
> > problems
> > > revolving around serial port cables with 12.0.4 or so.
> > >
> > > Chuck
> > >
> > > -----Original Message-----
> > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] On Behalf
Of
> > Arun
> > > Sent: Saturday, May 26, 2001 3:58 AM
> > > To: [EMAIL PROTECTED]
> > > Subject: help --------------Pls ................OIR Error [7:6021]
> > >
> > > Hi
> > > I have router configured as X25 router .I have 2 slots in it with each
> > > having 4 serial ports on them.The problem is that when i connect the
> cisco
> > > provided cable just the cable to the administratively shutdown serial
> port
> > > it gives me error :
> > > %OIRINT:OIR Event has occured OIR_ctrl 50 oir stat 8F88
> > > ( i have checked OIR it stands online insertion and removal but i
could
> > not
> > > find this particular error)
> > > and this also hangs the router i have checked the cable i can not do
> many
> > > thngs on the router as it is in live n/w ..Please help ..the router
> works
> > > well after i remove cable and restart the router .
> > > Any help will be appreciated
> > >
> > >
> > > Regards
> > > Arun Sharma
> > > FAQ, list archives, and subscription info:
> > > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > FAQ, list archives, and subscription info:
> > http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> > FAQ, list archives, and subscription info:
> http://www.groupstudy.com/list/cisco.html
> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6070&t=6021
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
