*giggle*
can we see your config?
----- Original Message -----
From: "Jason Witover"
To:
Sent: Wednesday, May 30, 2001 4:38 PM
Subject: Can't Ping e0/0 [7:6513]
> I have a 2611 with a t0/0 an e0/0 and a s0/0.
>
> The router was set up by someone else who made it a source bridge using
the
> s0/0 interface. I am trying to interface a tiny network of 5 PC's that are
> on a 3com switch to that e0/0 interface. I gave the interface an IP
address
> on the same schema as the 5 pc's and gave the no shut command on it. I get
a
> link light on both the switch and the router. When I do a show interface
> e0/0 it says the interface is up and the line protocol is up. I can ping
my
> own e0/0 interface but every other pc on the network can not ping that
> interface, nor can the router ping any other computer.
>
> I also typed in ip routing to see if that would fix it, but it did not. I
> shut the interface and no shut the interface a few times, but still no
help.
>
> I know you are all much much smarter than me.. so PLEASE teach me the
errors
> of my ways.
>
> Thanks group!
>
> Jason
> FAQ, list archives, and subscription info:
http://www.groupstudy.com/list/cisco.html
> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6522&t=6513
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
