The original 10-Mbps Ethernet II and 802.3 standards use Manchester
encoding for all media types. Manchester encoding specifies that a bit
period is divided into two equal intervals and there is always a transition
from either high to low or low to high in the middle of the bit period. A
binary zero is high first and then low. A binary one is low first and then
high. I haven't heard these called symbols, but perhaps your reference
calls them symbols.
Priscilla
At 07:09 PM 5/31/01, hal9001 wrote:
>Thanx for that any idea about the symbols?
>
>Karl
>----- Original Message -----
>From: "Fred Ingham"
>To: "hal9001" ;
>Sent: Thursday, May 31, 2001 11:45 AM
>Subject: Re: Manchester symbols [7:6655]
>
>
> > Manchester encoding is used on 10 Mbps Ethernet, Differential Manchester
> > encoding is used on token ring.
> >
> > Fred.
> >
> > hal9001 wrote:
> > >
> > > Something to do with Ethernet Encoding I fink...anyone else?
> > >
> > > Karl
> > > ----- Original Message -----
> > > From: "g_study"
> > > To:
> > > Sent: Thursday, May 31, 2001 9:07 PM
> > > Subject: Manchester symbols [7:6655]
> > >
> > > > What are Manchester symbols?
________________________
Priscilla Oppenheimer
http://www.priscilla.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=6683&t=6655
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
