Hi..dear all, We have a requirment to NAT a destination virtual IP to a different IP behind the "Firewall". I have set up a cisco 2500 "packet filter" with 2 interfaces ethernet0, 50.100.167.101 and ethernet1 192.168.3.2 and they are in two different networks. There is a SUN host 192.168.3.31 (A) in 192.168.3.X network, We want to contact A in network 192.168.3.X from B (50.100.167.199) in network 50.100.167.x via a virtual IP 50.100.167.102 in eth0. What I mean when I connect to 50.100.167.102, I actually connect to 192.168.3.31, but people won't know the real IP of that. Can Cisco IOS router do this? The information I get can only translate the source IP address. How about destination address? If yes, can you show me how is the command look like? CT ================================================================== De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en de afzender direct te informeren door het bericht te retourneren. ================================================================== The information contained in this message may be confidential and is intended to be exclusively for the addressee. Should you receive this message unintentionally, please do not use the contents herein and notify the sender immediately by return e-mail. ================================================================== Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=7032&t=7032 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
