Hi,
When we configure ATM subinterface as multipoint as shown below, you cannot
ping this address from the same router. But you can ping it only if you are
atleast one hop away from the router where you have define this multipoint
address. Can someone tell me why ?????
Exmaple
----------
interface ATM1/1/0.200 multipoint
ip address 2.2.2.1 255.255.255.0
no ip directed-broadcast
pvc 2/200
protocol ip 2.2.2.2 broadcast
For example you cannot ping 2.2.2.1 from this router, but if you would go
atleast one hop away from it, you can ping.
Thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7364&t=7364
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
