I don't think you can ping local multipoint interfaces at all (frame
neither).
DragiAli Amir wrote:
>
> Hi,
> When we configure ATM subinterface as multipoint as shown
> below, you cannot ping this address from the same router. But
> you can ping it only if you are atleast one hop away from the
> router where you have define this multipoint address. Can
> someone tell me why ?????
>
> Exmaple
> ----------
> interface ATM1/1/0.200 multipoint
> ip address 2.2.2.1 255.255.255.0
> no ip directed-broadcast
> pvc 2/200
> protocol ip 2.2.2.2 broadcast
>
> For example you cannot ping 2.2.2.1 from this router, but if
> you would go atleast one hop away from it, you can ping.
>
> Thanks.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7372&t=7364
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
