Chris,
Telnet on the outside only possible with IPSEC. If you need to access the
PIX remotely, you have 2 options: 1)IPSEC (pain in the ass to setup) and 2)
SSH (pretty easy to setup).
HTH,
Nabil
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of
Burnham, Chris
Sent: Thursday, June 07, 2001 11:55 AM
To: [EMAIL PROTECTED]
Subject: PIX PASSWORD [7:7542]
I have a Pix which I cannot get telnet access to. I have configured telnet
and specified the addresses which are allowed/ a passwd has been applied to
the console.
Has anyone else seen similar problemsThis e-mail and any files transmitted
with it are intended solely for the addressee and are confidential. They may
also be legally privileged.Copyright in them is reserved by Delphis
Consulting PLC ["Delphis"] and they must not be disclosed to, or used by,
anyone other than the addressee.If you have received this e-mail and any
accompanying files in error, you may not copy, publish or use them in any
way and you should delete them from your system and notify us
immediately.E-mails are not secure. Delphis does not accept responsibility
for changes to e-mails that occur after they have been sent. Any opinions
expressed in this e-mail may be personal to the author and may not
necessarily reflect the opinions of Delphis
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7592&t=7542
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
