goto the port that is connected to your router
telnet into switch and
set trunk (mod/port) (on/off/desirble/auto) (vlan`s) (type) e.g
set trunk 3/4 on 1-1005 isl
then on router ...
int E0.1
ip address x.x.x.x x.x.x.x
isl X (whatever your vlan is)
no shut
HTH
steve
>From: "Michael Oaks"
>Reply-To: "Michael Oaks"
>To: [EMAIL PROTECTED]
>Subject: 6509 VLAN [7:7744]
>Date: Fri, 8 Jun 2001 11:59:05 -0400
>
>I am trying to configure a VLAN between a 6509 and a 2980. I'm pretty
>sure I can get the 2980 part done ok, but I have never used a 6509.
>Could someone give me some proceedures on configuring this VLAN.
>
>Thanks
_________________________________________________________________________
Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7755&t=7744
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
