Hello,
I'm not sure what you are trying to do but in a nutshell. The command line
on both 2980 and 6509 are the same. You create vlan in 2980 the way you
create a vlan in 6509. Which is "set vlan #", this would create a vlan in
the database. You might need to set your vtp before it allows you to create
a vlan, furthermore, this only created a vlan in the database and have not
assign any of the port to a particular vlan.
VLANs allow you to group ports on a switch to limit unicast, multicast, and
broadcast traffic flooding. Flooded traffic originating from a particular
VLAN is only flooded out other ports belonging to that VLAN.
To assign a port 2/1 to vlan 5:
set vlan 5 2/1
Check this link out for configuring the 6509:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_5_5/cnfg_gd/vlans.htm#16625
This link is for 2980:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_5_5/sw_cfg/vlans.htm#xtocid208021
If you have MSFC, this link have that info:
http://www.cisco.com/univercd/cc/td/doc/product/lan/cat6000/sw_5_4/msfc/index.htm
I hope this helps.
>From: "Michael Oaks"
>Reply-To: "Michael Oaks"
>To: [EMAIL PROTECTED]
>Subject: 6509 VLAN [7:7744]
>Date: Fri, 8 Jun 2001 11:59:05 -0400
>
>I am trying to configure a VLAN between a 6509 and a 2980. I'm pretty
>sure I can get the 2980 part done ok, but I have never used a 6509.
>Could someone give me some proceedures on configuring this VLAN.
>
>Thanks
_________________________________________________________________
Get your FREE download of MSN Explorer at http://explorer.msn.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7762&t=7744
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
