I havn't seen 'sh ip rip database' .
What IOS are you running with ?
Phil.
----- Original Message -----
From: "Lupi, Guy"
To: "'Philip Barker'" ;
Sent: Monday, June 11, 2001 3:37 PM
Subject: RE: IGRP [7:7966]
> I know that the RIB is sent on a regular basis, but even RIP has a "show
ip
> rip database" that will show you routes that the router has seen but did
not
> install in the table. I am looking for a command that will do something
> similar to this. I cannot find one in any documentation that I have, I
was
> hoping that someone else has also encountered this. It is very possible
> that the command does not exist, but I was hoping that is not the case.
>
> -----Original Message-----
> From: Philip Barker [mailto:[EMAIL PROTECTED]]
> Sent: Monday, June 11, 2001 10:19 AM
> To: Lupi, Guy; [EMAIL PROTECTED]
> Subject: Re: IGRP [7:7966]
>
>
> IGRP is a distance vector routing protocol whereby the RIB is sent on a
> regular basis.
> There isn't a database to my knowledge as you find with OSPF and EIGRP.
>
> Phil.
> ----- Original Message -----
> From: "Lupi, Guy"
> To:
> Sent: Monday, June 11, 2001 2:03 PM
> Subject: IGRP [7:7966]
>
>
> > I set up IGRP in a lab this weekend, studying up on the earlier
protocols.
> > What I need to know is, how would I go about seeing all the routes in
the
> > database so I can determine what routes the router is seeing in addition
> to
> > what is in the routing table? I could not find a "show ip igrp
database"
> or
> > anything similar. I ended up having to set the variance to the maximum
> > (128), looking at all the routes and their corresponding metrics, and
then
> > setting the variance command again to install only those routes I
wanted.
> > Thanks in advance for any help.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=7977&t=7966
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
