It looks like you are also having issues at your end and your router might
be part of the problem since you don't even have your serial interface up.
reboot the router. also check on your csu and find out if the send and
receive lights are green .also make sure there is no bipolar violation with
the wan. if the receive light is not on, it's likely that you are not
receving no lmi from the frame relay switch. you also made mention of the
fact that telco cannot loop their smart jack and I think they certainly have
to dispatch on site and check on the smart jack. if they end up running the
circuit clean to the smart jack and your circuit is still not up, the
problem might lie between the csu and your router. first make sure your
serial interface is up then check on the cable between the csu and the
router. sometimes power cycling the csu also resolves some of these issues.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=8681&t=8648
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
