Hi,
the problem could be that only process-switched packets get 'seen' by the
debug process. issue 'no ip route-cache' at the interface config. please
report if this solved the problem ...
Greetings
Reinhold
On Tue, 19 Jun 2001, cisco guru wrote:
> Hi all,
> I am trying to see the debug output on my routers via telnet sessions but
am
> not having any luck. I first got the debug ip packet command to work but
> then it stopped working. No other debug commands will work. Eg. debug ip
> igrp trans
> I have the service timestamps commands issued along with the term mon
> command on the router running the telnet session.
> The ios ver. on this particular router is 11.0 (10c). Does the ios ver.
make
> a difference or does something in particular have to be done on both
> routers?
> Please advise.
> Thank you.
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9087&t=9019
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
