To view the ouput of a debug command via a telnet session you must issue the
following command:
terminal monitor
Mike W.
"cisco guru" wrote in message
[EMAIL PROTECTED]">news:[EMAIL PROTECTED]...
> Hi all,
> I am trying to see the debug output on my routers via telnet sessions but
am
> not having any luck. I first got the debug ip packet command to work but
> then it stopped working. No other debug commands will work. Eg. debug ip
> igrp trans
> I have the service timestamps commands issued along with the term mon
> command on the router running the telnet session.
> The ios ver. on this particular router is 11.0 (10c). Does the ios ver.
make
> a difference or does something in particular have to be done on both
> routers?
> Please advise.
> Thank you.
> _________________________________________________________________
> Get your FREE download of MSN Explorer at http://explorer.msn.com
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9264&t=9019
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
