Hi all,

Thought I'd ask if anyone has experienced similar to a problem I've had
recently. It's going to TAC now and I've got a workaround, but I'd be
interested if anyone could suggest the reason or confirm a bug which I have
been unable to locate.

These routers had been running for nearly a year with no problems. All of a
sudden they started giving problems and I have been unable to track down
what external network changes may have triggered it. There were no config
changes to the two routers (We run Resource Manager Essentials which
monitors router config changes)

Set-up was two 3660's running 12.1.1T, DES encryption over serial 2Mb link.
The links were set up with encryption peers as the serial IP addresses and
encryption access lists set up symmetrically without using any any on the
serial interfaces.

After reload routers come up fine and encryption runs O.K.
After a varying length of time (around 5-10 minutes), the CPU utilisation
builds up gradually until it sits at around 98%. This utilisation was almost
totally due to encryption process.

After swapping out the router and upgrading IOS, the problem still existed.

I have got around the problem by using IP Unnumbered Loopback0 on Serial
links.  CPU utilisation now hovers around 2%.

Anybody seen similar, or suggest what could make the CPU utilisation
snowball like this?


Thanks,

Gareth Hinton




Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9131&t=9131
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]

Reply via email to