Can anyone steer me in the right dir IOS wise with this router. It seems to have a old obscure bug with ISDN and CHAP connections, and I need to flash it. It needs to have ISDN, IP and IPX. Here is the show ver. Thanks guys. Cisco Internetwork Operating System Software IOS (tm) 3000 Software (IGS-INR-L), Version 11.1(5), RELEASE SOFTWARE (fc1) Copyright (c) 1986-1996 by cisco Systems, Inc. Compiled Mon 05-Aug-96 12:43 by mkamson Image text-base: 0x0302AC0C, data-base: 0x00001000 ROM: System Bootstrap, Version 11.0(5), SOFTWARE ROM: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(5), RELEASE SOFTWARE (fc1) System restarted by power-on System image file is "flash:igs-inr-l.111-5", booted via flash cisco 2524 (68030) processor (revision B) with 2048K/2048K bytes of memory. Processor board ID 03879553, with hardware revision 00000000 Bridging software. X.25 software, Version 2.0, NET2, BFE and GOSIP compliant. Basic Rate ISDN software, Version 1.0. 1 Ethernet/IEEE 802.3 interface. 2 Serial network interfaces. 1 ISDN Basic Rate interface. 56k 4-wire CSU/DSU for Serial Interface 0 No module installed for Serial Interface 1 Integrated NT1 for ISDN Basic Rate interface 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read ONLY) Configuration register is 0x2102 Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=9203&t=9203 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]