I believe Cisco's recommended solution for this is to use 2 bridges in the
intermediate
hop. BldgA -----5Miles----- BridgeA on tower ---Ethernet--- BridgeB on tower
----3Miles---- BldgB.
Jay Dunn
IPI*GrammTech, Ltd.
http://www.ipi-gt.com
>Question for you wireless users of Aironet. I have about 10 of these
>installed as "bridges only," from bldg to bldg with line of site. I have a
>new requirement to hook up a bldg that does not have LOS. I know the
>Aironet340 can repeat, but only seen it done inside bldgs as access points.
>Can I put an Aironet on BldgA ----------5miles------------Tower
>repeat--------3miles-----------BldgB
>Would appreciate your input. Am I barking up the right tree or should I be
>looking at another product?
>
>Bob Sites
>System Engineer
>Valley Health System, IS Dept.
>[EMAIL PROTECTED]
>
>
>Confidentiality Notice:
>
>This e-mail message, including any attachments, is for the sole use of the
>intended recipients and may contain confidential and privileged information.
>Any unauthorized review, use, disclosure or distribution is prohibited. If
>you are not the intended recipient, please contact the sender by reply
>e-mail and destroy all copies of the original message.
http://www.ktc.net
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9250&t=9201
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
