-----Original Message-----
From: Pete [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 21, 2001 8:44 PM
To: 'John McCartney'
Cc: '[EMAIL PROTECTED]'
Subject: RE: Port config problem [7:9415]
http://www.cisco.com/support/Errordecoder/error-decoder.html
The Fast Ethernet port did not find a carrier when preparing to send a
packet. This means that it is no longer receiving signals from the LAN.
This problem can be caused by disconnected Fast Ethernet cabling or a
transceiver failure.
Recommended Action: Check the Fast Ethernet wiring and the port adapter.
If the message recurs, copy the error message exactly as it appears on
the console or in the system log, call your Cisco technical support
representative, and provide the representative with the gathered
information.
Sincerely,
Peter Kurdziel CCNA, CCDA, MCSE, MCP+i
iNotez.com Network Solutions
Flash: www.inotez.com
Non-Flash: www.inotez.com/index2.htm
Message Board: www.inotez.com/cgi-bin/ikonboard/ikonboard.cgi
Email: [EMAIL PROTECTED]
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]
Sent: Thursday, June 21, 2001 4:20 PM
To: [EMAIL PROTECTED]
Subject: Port config problem [7:9415]
Hello all I have two routers 7507 and 7207 that are giving me the same
error
message on the FastEthernet ports and can't figure out what it's trying
to
tell me. Anybody have any ideas on how to fix it, any help is
appreciated.
Error Message
%DEC21140-5-NOCARR: [chars] cable/connector problem?
John
CCNA
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9463&t=9415
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
