NAT.
you need to NAT the 10/8 address range!
Always!
What was that RFC number for the private addys again?
Peter Slow,CCNP Voice Slecialist
----- Original Message -----
From: "Mitesh Khatri"
To:
Sent: Thursday, June 21, 2001 9:56 AM
Subject: IP Routing Help Please!! [7:9312]
> [ The following text is in the "iso-8859-1" character set. ]
> [ Your display is set for the "US-ASCII" character set. ]
> [ Some characters may be displayed incorrectly. ]
>
> Hi!
>
> I have a problem with routing to the internet from a remote site. There is
a
> router at the remote site (Ethernet IP Address 10.1.3.0/24) that connects
to
> a 2-port router at the head office. One port of the router is connected to
> the remote site (IP address 10.1.2.0/24 for the WAN link) while the other
> port connectes via a lease line to a ISP (IP Address for the serial link
is
> a Class C address). On the headoffice router I have a default route to
> serial 1(the ISP link). I am not using any routing protocols for the
> Internet link. Also there is no DNS Server at the headoffice. The users at
> head office are able to connect to the Internet. I need the users at the
> remote site to connect to the Internet and use the ISP's name server which
> has a Class C IP address.
>
> Can someone please advise is this can be done?
>
> Thanks,
>
> Mitesh
>
>
> Important Notice
> ***This email and any files transmitted with it are confidential and
> intended solely for the use of the individual or entity to whom they
> are addressed. If you have received this email in error please notify
> the post master or system manager @tfl.com.fj [Telecom Fiji Ltd.]***
Message Posted at:
http://www.groupstudy.com/form/read.php?f=7&i=9470&t=9312
--------------------------------------------------
FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html
Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
